|
Design |
|
ESI grips are
designed and manufactured by a bicyclist to be the best.
|
|
|
Engineered |
|
Engineered one side thicker
for absorbing shock and vibration with the opposite side thinner for
bulk-reducing comfort. The best materials and the best
production process creates max shock absorption and grip, while
maintaining the lowest weight possible and the highest level of
durability. |
|
|
Proven |
|
These race
proven lightweight grips are used by bicyclist all over the world. |
|
|
Memory |
|
No tread or logos needed!
Silicone has a memory; when you grab an ESI Grip you get a custom
mold of your hand for a no slip ride every time. |
|
| Installation |
|
Clean handle bars. Press in
End Caps. Using Rubbing Alcohol or Window Cleaner clean inside of
ESI MTB grips, wet bar and inside of grip, slide onto bar. Rotate
grip to have the Thicker side towards palm. Let dry for 24 hours. |
|
| Removal |
|
Slide a screw driver with a
dulled point (or something similar) under grip (careful not to
scratch bar or stretch grip), squirt Rubbing Alcohol, Window cleaner
or water under grip, twist grip off bar. Clean inside of grip with
Rubbing Alcohol or Window cleaner and reinstall. If you have access
to a compressor just blow them off. |
|
| Grip Shift
or Custom sizes |
|
You can cut ESI grips with
sharp scissors, utility knife, pipe cutter, etc. Hold next to your
bar and cut leaving an extra 1/8” in length. We recommend Chunky
style for a smooth transition on Grip Shift. |
|
| Cleaning |
|
Wash your grips when you wash
your bike. If you do not wash your bike; clean when you can no
longer see what color your grips are or they lost that tacky feel.
Wash with Rubbing Alcohol, Window cleaner, etc... until clean.
For deep cleaning use Acetone and a rag – put acetone on the rag and
rub the grips until clean. |
|
| Latex Free |
|
ESI's Silicone Grips and End
Caps do not contain any natural rubber or natural rubber latex in
its components or ingredients. |
|
|
For more information please go to
our Questions and Answers page. |
